TCM810JVLB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 12μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.93V |
| Max Reset Threshold Voltage | 4.06V |
| Threshold Voltage | +4V |
| Undervoltage Threshold | 3.93V |
| Overvoltage Threshold | 4.06V |
| Length | 2.025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM810JVLB713 Overview
As you can see, this power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. This power management system has 3 pins. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 12μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by TCM810. This power management requires 5V power to work.
TCM810JVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
TCM810JVLB713 Applications
There are a lot of Microchip Technology TCM810JVLB713 Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Linux and server computing
- DVR
- Household appliances
- FPGA design
- Magnetic resonance imaging
- Battery-powered equipment
- DC stabilized power supply module
- Solar power charger
- Set top box
