TCM810SVLB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM810SVLB713 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SC-70, SOT-323 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to TCM810, which is the base power ics number.
TCM810SVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810SVLB713 Applications
There are a lot of Microchip Technology TCM810SVLB713 Voltage Supervisors applications.
- Refrigeration
- Leakage current detection
- Utility meter
- Solar power charger
- Military communications
- DC stabilized power supply module
- FPGA design
- Battery-powered equipment
- Dash board
- Power distribution systems of infant care room
