TCM810SVNB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM810SVNB713 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 3 pins in it. Pin count of the power management is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 9μA volt supply current. You can always use TCM810, the base supervisor number, to search for similar PMICs of the manufacturer.
TCM810SVNB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810SVNB713 Applications
There are a lot of Microchip Technology TCM810SVNB713 Voltage Supervisors applications.
- FPGA design
- Leakage protection
- Cloud computing
- Leakage current detection
- Multi-voltage system
- Sensitive sensors
- Precision measurement
- Digitally controlled LDO regulators circuit
- Refrigeration
- Important electronics for automotive safety
