TCM810TENB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Length | 2.92mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM810TENB713 Overview
A total of 3 terminals are used to mount this power management. Cut Tape (CT)-packaging is used. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. You can always use TCM810, the base supervisor number, to search for similar PMICs of the manufacturer.
TCM810TENB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810TENB713 Applications
There are a lot of Microchip Technology TCM810TENB713 Voltage Supervisors applications.
- Power distribution systems of operating room
- Refrigeration
- Satellite navigation
- Set top box
- Important electronics for automotive safety
- Power distribution systems of ICU
- Magnetic resonance imaging
- Embedded computing
- Rechargeable batteries
- DSP
