TCM810TVLB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM810TVLB713 Overview
As you can see, this power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 3.3V. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 9μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to TCM810, which is the base power ics number.
TCM810TVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810TVLB713 Applications
There are a lot of Microchip Technology TCM810TVLB713 Voltage Supervisors applications.
- Insulation fault location system
- External alarm
- Battery-powered equipment
- Automotive permanent magnet synchronous motors
- Automotive power systems
- Medical-specific insulation monitor
- Digitally controlled LDO regulators circuit
- Urban rail transit weak current power monitoring
- WiFi router
- Unattended substation automation
