TCM810ZVLB713
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 2.28V |
| Max Reset Threshold Voltage | 2.35V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.28V |
| Overvoltage Threshold | 2.35V |
| Height | 1.1mm |
| Length | 2.25mm |
| Width | 2.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
TCM810ZVLB713 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 2.5V supply voltages. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. 3 pins are present in total in this power management. 3 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 9μA. You can always use TCM810, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 2.5V volts of power.
TCM810ZVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810ZVLB713 Applications
There are a lot of Microchip Technology TCM810ZVLB713 Voltage Supervisors applications.
- Personal computers
- Military electronics
- Sensitive sensors
- Analog circuit
- Kitchen appliances
- Electronics installed in the vehicle
- Leakage current detection
- Battery cars
- Leakage protection
- Household appliances
