Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.96mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TCM810 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Power Supplies |
2.5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
9μA |
Nominal Supply Current |
9μA |
Power Dissipation |
320mW |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active High |
Voltage - Threshold |
2.32V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.05mA |
Min Reset Threshold Voltage |
2.28V |
Max Reset Threshold Voltage |
2.35V |
Threshold Voltage |
+2.32V |
Undervoltage Threshold |
2.28V |
Overvoltage Threshold |
2.35V |
Height |
1.02mm |
Length |
3.04mm |
Width |
1.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TCM810ZVNB713 Overview
A total of 3 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 2.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 3 pins in it. 3 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 9μA. A similar IC managements number of the manufacturer can always be found by using TCM810, the base power ics number. It is necessary to have 2.5V volts of power in order for this voltage supervisor to operate.
TCM810ZVNB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM810ZVNB713 Applications
There are a lot of Microchip Technology TCM810ZVNB713 Voltage Supervisors applications.
- Important electronics for automotive safety
- Unattended substation automation
- Detection of phase sequence
- Kitchen appliances
- Medical-specific insulation monitor
- Data storage applications
- emergency room
- Power distribution systems of operating room
- Low voltage/high power - AI, GPU
- Military communications