TD350ETR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 12V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TD350 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Nominal Supply Current | 5mA |
| Power Dissipation | 500mW |
| Output Current | 2.3A |
| Max Supply Current | 1A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 650 ns |
| Rise Time | 175ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 620 ns |
| Rise / Fall Time (Typ) | 130ns 75ns Max |
| Interface IC Type | HALF BRIDGE BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.65 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 2.3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 4.2V |
| Length | 8.65mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TD350ETR Overview
A higher degree of flexibility is achieved by adopting its 14-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.Configuration is supported by 1 drivers.It's mounted on the way to Surface Mount.When the supply voltage is set to 12V~26V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as the input type.Initially, the configuration is composed of 14 terminations.There are various related parts under its base part number TD350.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 14 pins.With a supply voltage of 16V, it is designed to operate.Mosfet driver employs an interface chip called HALF BRIDGE BASED IGBT/MOSFET DRIVER as Mosfet drivers interface chip.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 14 component pins.For its basis, 2 outputs are integrated.The output current can be set to 2.3A.Its maximum power dissipation of 500mW also demonstrates its maximum ability to transfer power without overheating.For higher stability, the supply current should be kept at 1A.
TD350ETR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
Maximum power dissipation of 500mW
TD350ETR Applications
There are a lot of STMicroelectronics TD350ETR gate drivers applications.
- Motor Drives
- Isolated switch mode power supplies (SMPS)
- High-voltage isolated DC-DC converters
- RGB applications
- Digitally controlled power supplies
- Motor Control
- Active filtering
- PCMCIA applications
- Portable Navigation Devices
- Industrial motor drives - compact, standard, premium, servo drives
