TD350IDT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Technology | BICMOS |
| Voltage - Supply | 12V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Base Part Number | TD350 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 2.3A |
| Nominal Supply Current | 10mA |
| Power Dissipation | 500mW |
| Output Current | 2.3A |
| Max Supply Current | 5mA |
| Propagation Delay | 600 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 600 ns |
| Rise Time | 175ns |
| Fall Time (Typ) | 90 ns |
| Rise / Fall Time (Typ) | 130ns 75ns Max |
| Interface IC Type | HALF BRIDGE BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 2.3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 4.2V |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TD350IDT Overview
Gate drivers provides greater flexibilGate driversy to use the 14-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.This configuration includes 1 drivers.There is a mounting bracket in the way of Surface Mount.Using a 12V~26V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.The input type for this program is Non-Inverting.The configuration is based on 14 terminations.Numerous related parts can be found under its base part number TD350.The device is mounted with Surface Mount.When designing, the device is configured with 14 pins.Mosfet driver is designed specifically to run on 16V volts of power.As its interface IC, HALF BRIDGE BASED IGBT/MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 2.3A.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 14 component pins on the board.For its basis, there are 2 outputs integrated.This device supports a current output of 2.3A at the output.Considering its maximum power dissipation, 500mW shows its maximum capacity to transfer and conduct power loss without overheating.To ensure high stability, the supply current should be kept at 5mA.
TD350IDT Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
Maximum power dissipation of 500mW
TD350IDT Applications
There are a lot of STMicroelectronics TD350IDT gate drivers applications.
- DC-DC Converters
- Isolated Supplies for controller area network (CAN),
- Line drivers
- Digitally controlled power supplies
- A/D drivers
- Multicolor LED/laser displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated switch mode power supplies (SMPS)
- Motor Control
- Dual-Battery Systems
