TD351ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 12V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TD351 |
| Pin Count | 8 |
| Output Voltage | 28.3V |
| Max Output Current | 1.7A |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 500mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 2.2 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 μs |
| Max Output Voltage | 28V |
| Rise Time | 100ns |
| Fall Time (Typ) | 100 ns |
| Rise / Fall Time (Typ) | 100ns 100ns Max |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 1.7A |
| Logic Voltage - VIL, VIH | 0.8V 4.2V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TD351ID Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tube represents the package.This device is equipped with 1 drivers for its configuration.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 12V~26V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.Initially, the configuration is composed of 8 terminations.Many related parts can be found under its base part number TD351.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to operate at 16V volts.There is an interface IC called HALF BRIDGE BASED PERIPHERAL DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 1.7A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.500mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.For higher stability, the supply current should be kept at 2.5mA.In this case, it outputs 28.3V voltage.A maximum voltage of 28V should be maintained for the output voltage.
TD351ID Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
TD351ID Applications
There are a lot of STMicroelectronics TD351ID gate drivers applications.
- Motor Controls
- Multicolor LED/laser displays
- White Goods - Air Conditioner, Washing Machine,
- Industrial Modules
- Topologies
- General Purpose 3-Phase Inverter
- Line drivers
- Portable Media Players
- High-speed communications
- Uninterruptible Power Supplies (UPS)
