Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
930.006106mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
500mW |
Voltage - Supply |
12V~26V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
16V |
Terminal Pitch |
2.54mm |
Base Part Number |
TD351 |
Pin Count |
8 |
Output Voltage |
28.3V |
Max Output Current |
1.7A |
Operating Supply Current |
2.5mA |
Power Dissipation |
500mW |
Max Supply Current |
2.5mA |
Propagation Delay |
2.2 μs |
Input Type |
Non-Inverting |
Turn On Delay Time |
2.2 μs |
Max Output Voltage |
28V |
Rise Time |
100ns |
Fall Time (Typ) |
100 ns |
Rise / Fall Time (Typ) |
100ns 100ns Max |
Interface IC Type |
HALF BRIDGE BASED PERIPHERAL DRIVER |
Channel Type |
Single |
Number of Drivers |
1 |
Driven Configuration |
High-Side |
Gate Type |
IGBT, N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
1.3A 1.7A |
Logic Voltage - VIL, VIH |
0.8V 4.2V |
Turn Off Time |
0.4 μs |
Built-in Protections |
OVER CURRENT; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE SINK |
Height |
3.3mm |
Length |
9.8mm |
Width |
7.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TD351IN Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube represents the package.1 drivers are incorporated for its configuration.Through Hole is the way in which it is mounted.By using 12V~26V supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts are available for its base part number TD351.In this case, Through Hole indicates how the device is mounted.During design, it is configured with 8 pins.With a supply voltage of 16V, it is designed to operate.Mosfet driver employs an interface chip called HALF BRIDGE BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.1.7A is the maximum output current.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.Based on the maximum power dissipation of 500mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To ensure high stability, the supply current should be kept at 2.5mA.As a result, a voltage of 28.3V is produced.The power supply voltage for this device is set to 2.5mA.A maximum voltage of 28V should be maintained for the output voltage.
TD351IN Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
TD351IN Applications
There are a lot of STMicroelectronics TD351IN gate drivers applications.
- 3-Phase Motor Inverter Driver
- Solar inverters
- Commercial and agricultural vehicles (CAV)
- High-voltage isolated DC-DC converters
- Motor controllers
- Motor Drives
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial air-conditioning (CAC)
- Multicolor LED/laser displays
- serial peripheral interface (SPI), I2C