TD352ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 12V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TD352 |
| Pin Count | 8 |
| Max Output Current | 1.7A |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 500mW |
| Propagation Delay | 500 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Rise Time | 100ns |
| Fall Time (Typ) | 100 ns |
| Rise / Fall Time (Typ) | 100ns 100ns Max |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 2.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 1.7A |
| Logic Voltage - VIL, VIH | 0.8V 4.2V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TD352ID Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tube case.1 drivers are incorporated for its configuration.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 12V~26V supply voltage.A gate type of IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is Non-Inverting.Its configuration is based on a total of 8 terminations.There are numerous related parts listed under its base part number TD352.The device is mounted with Surface Mount.As a result, it is configured with 8 pins when it is designed.In addition, it is specifically designed to operate with a supply voltage of 16V.Mosfet driver employs an interface chip called HALF BRIDGE BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.There is a maximum output current of 1.7A that can be achieved.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 8 component pins.The maximum power dissipation of 500mW shows its maximum capability to transfer and conduct power loss without overheating.
TD352ID Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
TD352ID Applications
There are a lot of STMicroelectronics TD352ID gate drivers applications.
- Multicolor LED/laser displays
- DC-DC Converters
- Pulse transformer drivers
- Solar inverters
- Motor Controls
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Solar power supplies
- Portable Navigation Devices
- Industrial Motor Inverter - Power Tools, Robotics
- Video amplifiers
