TD352IDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 12V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TD352 |
| Pin Count | 8 |
| Max Output Current | 1.7A |
| Operating Supply Current | 2.5mA |
| Power Dissipation | 500mW |
| Propagation Delay | 500 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Rise Time | 100ns |
| Fall Time (Typ) | 100 ns |
| Rise / Fall Time (Typ) | 100ns 100ns Max |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 2.2 µs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 1.7A |
| Logic Voltage - VIL, VIH | 0.8V 4.2V |
| Turn Off Time | 0.4 µs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TD352IDT Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A package of Tape & Reel (TR) has been used.1 drivers are incorporated for its configuration.Its recommended mounting way is Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 12V~26V.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number TD352.Surface Mount is the way it takes to mount the device.There are 8 pins available in the device.In addition, it is specifically designed to operate with a supply voltage of 16V.As its interface IC, HALF BRIDGE BASED PERIPHERAL DRIVER is being employed.An output current as high as 1.7A can be achieved at maximum power.There are several useful electronic components within its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.Using 500mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The power supply voltage for this device is set to 2.5mA.
TD352IDT Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
TD352IDT Applications
There are a lot of STMicroelectronics TD352IDT gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Head-up and Head mounted displays
- Portable computers
- General Purpose 3-Phase Inverter
- Solar power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
- Video amplifiers
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
