TD352IN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 12V~26V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TD352 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 28.3V |
| Max Output Current | 1A |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 500mW |
| Propagation Delay | 500 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Max Output Voltage | 28V |
| Rise Time | 100ns |
| Fall Time (Typ) | 100 ns |
| Rise / Fall Time (Typ) | 100ns 100ns Max |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 2.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 1.7A |
| Logic Voltage - VIL, VIH | 0.8V 4.2V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TD352IN Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A packaging method of Tube is indicated.This configuration includes 1 drivers.Ideally, it should be mounted in the direction of Through Hole.By using 12V~26V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is used as its input type.The configuration starts with 8 terminations.There are various parts that can be found under its base part number TD352.The device is mounted using Through Hole.When designing, the device is configured with 8 pins.In order to operate, a voltage of 16V has to be applied.The interface IC of the device is HALF BRIDGE BASED PERIPHERAL DRIVER.There is an output current limit of 1A for this device.Within this subcategory of MOSFET Drivers, there are several useful electronic components.8 pins are present on the component.Based on its maximum power dissipation of 500mW, it is clear that it is capable of transferring and conducting power loss without overheating.28.3V is the output voltage.In order to maintain the maximum output voltage, it must be set at 28V.
TD352IN Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
TD352IN Applications
There are a lot of STMicroelectronics TD352IN gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
- Telecom switch mode power supplies
- Motor controllers
- Head-up and Head mounted displays
- Pulse transformer drivers
- Industrial Power Supplies
- Refrigerator
- LCD/LCoS/DLP portable and embedded pico projectors
- Solar inverters
