TDA2030AV
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 20W |
| Voltage - Supply | 12V~44V ±6V~22V |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | TDA2030 |
| Pin Count | 5 |
| Output Type | 1-Channel (Mono) |
| Max Output Current | 3.5A |
| Number of Channels | 1 |
| Nominal Supply Current | 80mA |
| Power Dissipation | 20W |
| Output Current | 3.5A |
| Quiescent Current | 80mA |
| Output Power | 18W |
| Slew Rate | 8 V/μs |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 20mV |
| Bandwidth | 100 kHz |
| Gain Bandwidth Product | 100 kHz |
| Nominal Input Voltage | 15V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 54dB |
| Gain | 80 dB |
| Max Dual Supply Voltage | 22V |
| Max Output Power | 18W |
| Min Dual Supply Voltage | 6V |
| Dual Supply Voltage | 18V |
| Input Bias Current | 2μA |
| Max Output Power x Channels @ Load | 18W x 1 @ 4 Ω |
| Load Impedance | 4Ohm |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDA2030AV Overview
In Pentawatt-5 (Vertical, Bent and Staggered Leads) is embedded this device.Chips should be packaged in Tube cases.There are 5 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) as the output.There is Class AB type of electrical device associated with this device.Computers and other communication devices feature 5 pins, which are pronged contacts.This electronic part is mounted in the way of Through Hole .In this electrical device, the supply voltage is 12V~44V ±6V~22V .1 channels are available on the device.Ensure that Short-Circuit and Thermal Protection is maintained when operating.Amp parts is recommended that the operating temperature not exceed -40°C~150°C TJ .In addition, it is equipped with 5 pins.Amp parts is included in Audio/Video Amplifiers .This is a member of the TDA2030 family.The electronic component is mounted in the way of Through Hole .According to the manufacturer, the maximum output power of this electronic component is 18W kWh per hour.This electronic part has a Dual supply type.Despite being unaffected by external factors, it consumes 80mA of quiescent current.Amplifier parts supplier offers the most design flexibilAmplifier parts suppliery due to the maximal output current of 3.5A .
TDA2030AV Features
Pentawatt-5 (Vertical, Bent and Staggered Leads) package
5 pin count
TDA2030 family
18W kWh per hour
TDA2030AV Applications
There are a lot of STMicroelectronics TDA2030AV audio amplifiers applications.
- Information processing
- Power generator
- Television broadcasting equipment
- Professional videography
- Automotive sensors
- Proportional counter tubes
- Portable electronic products powered by batteries
- Semiconductor detectors
- Proportional operation circuits
- single/dual op amp sum and difference circuits
