banner_page

TDA21102

TDA21102 datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from Infineon Technologies stock available at Noco


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-TDA21102
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 467
  • Description: TDA21102 datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from Infineon Technologies stock available at Noco(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -25°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2004
Series CoreControl™
JESD-609 Code e0
Feature Bootstrap Circuit
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Applications DC-DC Converters
Subcategory MOSFET Drivers
Max Power Dissipation 900mW
Technology Power MOSFET
Voltage - Supply 10.8V~13.2V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 12V
Base Part Number TDA21102
Pin Count 14
Number of Outputs 4
Max Output Current 4A
Operating Supply Voltage 12V
Interface PWM
Nominal Supply Current 4.9mA
Output Configuration Half Bridge (2)
Output Current 4A
Max Supply Current 1.8mA
Rise Time 22ns
Fall Time (Typ) 14 ns
Voltage - Load 5V~13.2V
Fault Protection Shoot-Through, UVLO
Number of Drivers 2
Turn On Time 0.035 μs
Output Peak Current Limit-Nom 4A
Rds On (Typ) 1.4 Ω LS, 1 Ω HS
Supply Voltage1-Nom 12V
High Side Driver YES
Load Type Inductive
Height Seated (Max) 1.75mm
Length 8.75mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

TDA21102 Overview


For packaging, Tape & Reel (TR) is used.Cost savings are achieved by including H bridge in the 14-SOIC (0.154, 3.90mm Width) package.Reliabilbridge drivery can be improved by increasing 10.8V~13.2V's supply voltage.H bridge circuit is put into place according to the way of Surface Mount.Motor driver H bridge's operating temperature enables -25°C~150°C TJ to function normally.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC-DC Converters as well.On PCBs, Surface Mount mounts H gate.Full bridge also possesses Bootstrap Circuit as a specific characteristic.It is possible to terminate a transmission line with a 14 termination using the H bridge which matches the characteristic impedance of the transmission line.A signal interface uses 14 pins as pronged contacts.Based on its base H bridge ic number of TDA21102, more closely related H bridge ics can be found.For the operation of the H bridge, a voltage supply of 12V is used.Electronic H-bridges of the CoreControl? series constitute this type of H-bridge.When the ambient temperature reaches 4A, the power supply will provide the maximum load current possible.There is 4A current flowing through the output and power supply pins.The 14 pins work together to provide this bridge driver with the functionality it requires.The Hbridge is equipped with 4 outputs.H bridge motor drivers in the MOSFET Drivers subcategory have a number of similarities.To ensure high efficiency, the operating supply voltage is maintained at 12V.2 drivers are inegrated in the system.

TDA21102 Features


Available in 14-SOIC (0.154, 3.90mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : TDA21102
Number of Receivers: 12V

TDA21102 Applications


There are a lot of Infineon Technologies TDA21102 Full Bridge Drivers, Half-Bridge Drivers applications.

  • DVD players
  • Small Form-Factor Voltage Regulator Modules
  • High current, low profile DC-DC converters
  • Desktop Computers
  • Networking Microprocessor Voltage Regulators
  • V-Core
  • CD players
  • Industrial Automation
  • Home Appliances
  • DC-DC Converters

Write a review

Note: HTML is not translated!
    Bad           Good