TDA4863-2
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Published | 1999 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Voltage - Supply | 12.5V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 14.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TDA4863 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 14.5V |
| Power Supplies | 14.5V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | SINGLE |
| Mode | Discontinuous Conduction (DCM) |
| Switching Frequency | 300kHz |
| Current - Startup | 20μA |
| Height Seated (Max) | 4.37mm |
| Length | 9.52mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TDA4863-2 Overview
There is a 8-DIP (0.300, 7.62mm) package that comes with it.A Tube-package is used.Depending on the device, the mounting type will either be Through Hole or C.It should be powered by 12.5V~20V's voltage supply.The device is set to operate at -40°C~150°C.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.8 terminals are found on the gadget.Startup current is 20μA.It should be noted that the pin number of this component remains at 8.I think the best thing about this device is that there is a number of TDA4863 in it.In this case, it has a sum of 8 pins.There is a minimum input voltage of 10.5V that can make it function properly.It's like a subclass of Switching Regulator or Controllers.Power for the component is always provided by a 14.5V volt supply.If you want to stop the power supply current from exceeding 6mA, the maximum supply current shall be Isup.There are 14.5V supplies on the device.
TDA4863-2 Features
TDA4863-2 Applications
There are a lot of Infineon Technologies TDA4863-2 PFC PMICs applications.
- Telematics
- Motor controllers
- Production line
- IBIS model
- Dashboards
- Fuel injector
- Analog control systems
- Ethernet condition monitoring vibration sensor
- Wired/Wireless audio systems
- DVD and CD-ROM drive
