TDA7295
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Multiwatt-15 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 15 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Depop, Mute, Short-Circuit and Thermal Protection, Standby |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 50W |
| Technology | BCDMOS |
| Voltage - Supply | ±10V~40V |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | TDA7295 |
| Pin Count | 15 |
| Output Type | 1-Channel (Mono) |
| Power Supplies | +-30V |
| Number of Channels | 1 |
| Power Dissipation | 50W |
| Quiescent Current | 30mA |
| Supply Current-Max | 65mA |
| Output Power | 80W |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 20 kHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Gain | 80 dB |
| Max Dual Supply Voltage | 40V |
| Max Output Power | 80W |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 28V |
| Input Bias Current | 500nA |
| Max Output Power x Channels @ Load | 80W x 1 @ 8 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 8Ohm |
| Height | 10.7mm |
| Length | 19.6mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDA7295 Overview
The device is embedded in Multiwatt-15 (Vertical, Bent and Staggered Leads) .Chips should be packaged in Tube cases.15 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts uses 1-Channel (Mono) as Amp partss output.The device belongs to the Class AB type of electrical devices.In a computer or other communication device, there are 15 pins, which are pronged contacts.This electronic part is mounted in the way of Through Hole .There is ±10V~40V voltage supply to this electrical device.The chip is equipped with 1 channels.The operation of Depop, Mute, Short-Circuit and Thermal Protection, Standby can be ensured.The operating temperature should not exceed 0°C~70°C TA .A total of 15 pins are present in it.Amp parts is part of Audio/Video Amplifiers .Amp parts is included in the TDA7295 family.Amp parts is mounted in the way of Through Hole .A maximum output power of 80W kWh per hour is possible for this electronic part.Amp parts is a Dual supply type.Amp parts is powered by a +-30V volt power supply.The device consumes 30mA quiescent current and is unaffected by external influences.Supply currents are limited to 65mA .
TDA7295 Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7295 family
80W kWh per hour
TDA7295 Applications
There are a lot of STMicroelectronics TDA7295 audio amplifiers applications.
- Radar
- Signal amplification
- Computer workstations and wireless base stations
- Inverse/same-phase proportional circuit
- Fast A/D and D/A converters, video amplifiers
- Test equipment
- Video and image computer boards
- Broadcasting
- ECG equipment
- Logarithmic and exponential operation circuits
