TDA7419
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Automotive Audio |
| Subcategory | Other Consumer ICs |
| Technology | BICMOS |
| Voltage - Supply | 8V~10V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Base Part Number | TDA7419 |
| Function | Audio Signal Processor |
| Operating Supply Voltage | 8.5V |
| Supply Voltage-Max (Vsup) | 10V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 4 |
| Interface | I2C |
| Nominal Supply Current | 35mA |
| Common Mode Rejection Ratio | 45 dB |
| Input Offset Voltage (Vos) | 500μV |
| Gain | 15 dB |
| Consumer IC Type | TONE CONTROL CIRCUIT |
| Number of Bands | 3 |
| Channel Separation | 90 dB |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDA7419 Overview
The book is also accompanied by a case, which only adds to the value of the book. There is a recommendation that it should be mounted with a Surface Mount type mount. Case 28-SOIC (0.295, 7.50mm Width) contains it. In this case, the device has 4 channels. To assist you, this part includes Audio Signal Processor functions. There is a Automotive Audio version of the device. There is a delivery within 8V~10V of the votage. In this device, temperature is measured in the -40°C~85°C TA range. 28 terminations are present on the chip. A search for parts belonging to the TDA7419 family will yield similar results. An accessible 28 pin can be found on the chip. TONE CONTROL CIRCUIT can be used to sort the part's consumer IC type. The minimum supply voltage (Vsup) for this part should not be less than 8V. This part of the family is called the Other Consumer ICs family. 10V is the maximum supply voltage (Vsup). An electrical component representing the Automotive, AEC-Q100 series can be found here. 8.5V-voltage supplies conduct current through the chip. It has 3 bands. It is important to keep the voltage gain at 15 dB.
TDA7419 Features
With 28-SOIC (0.295, 7.50mm Width) channels
operate temperature at the range of -40°C~85°C TA
consumer IC type: TONE CONTROL CIRCUIT
TDA7419 Applications
There are a lot of STMicroelectronics TDA7419 Audio Special Purpose applications.
- Graphic and P arametric Equalizers
- Digital Effects Processors
- Replacement of DIR1703
- AUDIO TEST EQUIPMENT
- multimedia speakers
- Consumer electronics
- Digital Television
- Car or Mobile Audio System
- DIGITAL AUDIO WORKSTATIONS
- A/V RECEIVERS
