Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-VDFN Exposed Pad |
Number of Pins |
8 |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Feature |
5V Regulated Output |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
24V |
Base Part Number |
TDE1708 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
Bipolar |
Operating Supply Voltage |
48V |
Interface |
On/Off |
Nominal Supply Current |
1.5mA |
Output Configuration |
High Side or Low Side |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
1.5mA |
Propagation Delay |
15 μs |
Input Type |
Non-Inverting |
Turn On Delay Time |
15 μs |
Switch Type |
General Purpose |
Min Input Voltage |
6V |
Max Input Voltage |
48V |
Ratio - Input:Output |
1:2 |
Voltage - Load |
6V~48V |
Driver Number of Bits |
2 |
Fault Protection |
Over Temperature, Reverse Current |
Output Peak Current Limit-Nom |
0.25A |
Built-in Protections |
TRANSIENT; THERMAL |
Height Seated (Max) |
1mm |
Length |
4mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TDE1708DFT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package 8-VDFN Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.The temperature should be set to -25°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.It produces a maximum output voltage of Bipolar volts at its maximum output.The lighting driver has 5V Regulated Output features.The TDE1708 family consists of this type.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.The LED driver has 1 functions.High efficiency is possible when the supply voltage is set to 24V.Surface Mount is mounted in the way.In total, it has 8 pins.This case results in a 250mA output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage should be set at 48V for best efficiency.As far as input voltage goes, its maximum is 48V volts.There is a minimum input voltage of 6V volts.This system has a maximum current requirement of 1.5mA.
TDE1708DFT Features
Supplied from 24V
TDE1708DFT Applications
There are a lot of STMicroelectronics TDE1708DFT Power Switches ICs applications.
- USB Power Distribution
- Wireless Headsets
- PC Cards
- Gaming
- Telecom and Network Systems
- Notebook PC
- USB Protection
- HDD and SSD
- PDAs
- Notebook and Tablet Computers