TDE1737FP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TDE1737 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Inverting, Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~45V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1737FP Overview
As you can see, it's packaged in the way of a Tube.The 14-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver has the mounting type Surface Mount.Relay, Solenoid Driver is the type of switch owned by it.It is recommended to set the temperature to -25°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of Bipolar volts.It is part of the TDE1737 family of LED drivers.A total of 14 terminations have been recorded.For operation, 14 pins are used.It consists of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.With a supply voltage of 24V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.In total, it has 14 pins.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this LED driver, the maximum supply voltage is configured to be 45V (Vsup).The supply voltage (Vsup) should be kept above 8V for normal operation.This part's power supply is 24V.
TDE1737FP Features
Supplied from 24V
TDE1737FP Applications
There are a lot of STMicroelectronics TDE1737FP Power Switches ICs applications.
- Portable Devices
- Solid-State Drives
- USB Ports/Hubs
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- USB Protection
- Solid State Drivers
- USB3.1 Power Delivery
- Hot Swap
- Hard Disk Drives
