TDE1747DP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TDE1747 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 50V |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 24V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Inverting, Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~45V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Output Peak Current Limit-Nom | 0.48A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1747DP Overview
The package is in the form of a Tube.Package 8-DIP (0.300, 7.62mm) contains it.It has been mounted as Through Hole on the LED driver.The switch type of this switch is Relay, Solenoid Driver.To ensure reliable operation, the temperature should be set to -25°C~85°C TA.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of Bipolar volts can be achieved by this LED driver.It is part of the TDE1747 family of LED drivers.A total of 8 terminations have been found in it.The operation is carried out using the 8 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 1A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 24V.In total, it has 8 pins.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 45V.This part is powered by 24V.When using this LED driving board, it is recommended that the supply voltage is set to 50V.
TDE1747DP Features
Supplied from 24V
TDE1747DP Applications
There are a lot of STMicroelectronics TDE1747DP Power Switches ICs applications.
- Wireless Headsets
- HDD and SSD
- USB Power Distribution
- Handheld Devices
- Various applications equipped with buttons
- Notebook and Tablet Computers
- Storage Drives
- Portable Devices
- Storage (HDDs, SSDs)
- Hot Swap
