TDE1747FP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TDE1747 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Output Current | 480mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Inverting, Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 480mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 1A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~45V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Output Peak Current Limit-Nom | 0.48A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1747FP Overview
The package is in the form of a Tube.The 14-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver is mounted in the Surface Mount position.It owns the Relay, Solenoid Driver switch type.The temperature should be set to -25°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of Bipolar volts at its maximum output.As you can see, it comes from the TDE1747 family.It has a total of 14 terminations.14 pins are used for operation.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 1A.As long as the supply voltage is 24V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 14 pins.When this is the case, the output current is set to 480mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.For normal operation, the supply voltage (Vsup) must be kept above 8V.This part's power supply is 24V.
TDE1747FP Features
Supplied from 24V
TDE1747FP Applications
There are a lot of STMicroelectronics TDE1747FP Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- Handheld Devices
- PC Cards
- Portable Video Game Players
- Solid-State Drives
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- HDD, SSD
- Wireless Modem Data Cards
