TDE1798DP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Current Rating | 500mA |
| Base Part Number | TDE1798 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Bipolar |
| Max Output Current | 900mA |
| Operating Supply Voltage | 50V |
| Power Supplies | 6/35V |
| Voltage | 50V |
| Interface | On/Off |
| Nominal Supply Current | 6.5mA |
| Current | 8mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Inverting, Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 500mA |
| Nominal Input Voltage | 50mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 3.32mm |
| Length | 10.92mm |
| Width | 6.6mm |
| Thickness | 3.32mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1798DP Overview
It is package in Tube case.It is included with the 8-DIP (0.300, 7.62mm) package as well.The lighting driver has the mounting type Through Hole.It owns the General Purpose switch type.It is best to set the temperature to -25°C~85°C TA to ensure reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of Bipolar volts can be obtained with this LED driver.The TDE1798 family consists of this type.It consists of 8 terminations in total.In order to operate, the 8 pins are used.It has 1 functions.The maximum output current must drop to 900mA to meet the operation criteria.The lighting driver is mounted in the direction of Through Hole.8 pins are connected to it in total.It is set to 500mA in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.There is a voltage supply of 6/35V volts on this part.In order to maximize efficiency, the supply voltage should be set at 50V.
TDE1798DP Features
TDE1798DP Applications
There are a lot of STMicroelectronics TDE1798DP Power Switches ICs applications.
- Set-Top Boxes
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- USB Power Distribution
- PC Cards
- Telecom and Network Systems
- Wireless Headsets
- Wireless/Networking Cards
- USB3.1 Power Delivery
- USB Protection
