TDE1897CDP
| Parameters | |
|---|---|
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Turn Off Time | 20 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TDE189 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
TDE1897CDP Overview
Tube is the way it's packaged.The 8-DIP (0.300, 7.62mm) package includes it.A Through Hole mounting is used for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -25°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.As you can see, it comes from the TDE189 family.A total of 8 terminations have been found in it.During operation, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 500mA.As long as the supply voltage is 24V, high efficiency can be achieved.The LED driving board is mounted in the way of Through Hole.The LED driver has a total of 8 pins.The output current is set to 500mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order to achieve the best efficiency, the supply voltage should be set to 35V.Input voltage is limited to 35V volts.There is a minimum input voltage of 18V volts.For its operation, a maximum current requirement of 20mA is required.
TDE1897CDP Features
Supplied from 24V
TDE1897CDP Applications
There are a lot of STMicroelectronics TDE1897CDP Power Switches ICs applications.
- Notebook PC
- PC Card Hot Swap
- USB Power Distribution
- Notebook and Tablet Computers
- Hot Swaps
- Storage Drives
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Set-top-box
