TDE1897RDP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TDE189 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Turn Off Time | 20 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Width | 7.62mm |
| Thickness | 3.32mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1897RDP Overview
It is packaged in the manner of a Tube.This package is included in 8-DIP (0.300, 7.62mm).Through Hole is the mounting type of the LED driver.The switch type is General Purpose.It is best to set the temperature to -25°C~85°C TA to ensure reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The TDE189 family consists of this type.It consists of 8 terminations in total.The operation is performed through the 8 pins.As far as functions are concerned, the lighting driver has 1.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.As long as the supply voltage is 24V, high efficiency can be achieved.It is positioned in the direction of Through Hole.8 pins are connected to it in total.It is set to 500mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The supply voltage should be set at 35V for best efficiency.This LED driver can handle voltages up to 35V volts.Input voltage must be at least 18V volts.There is a maximum current requirement of 20mA for its operation.
TDE1897RDP Features
Supplied from 24V
TDE1897RDP Applications
There are a lot of STMicroelectronics TDE1897RDP Power Switches ICs applications.
- USB Ports/Hubs
- Portable Video Game Players
- USB3.1 Power Delivery
- Portable GPS
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Solid State Drivers
- Portable/Handheld Devices
- Set-Top Boxes
- HDD, SSD
