TDE1897RFP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TDE189 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1897RFP Overview
As a result, it is packaged in the form of a Tube.In the 20-SOIC (0.295, 7.50mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -25°C~85°C TA.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.It belongs to the TDE189 family.It contains 20 terminations.During operation, the 20 pins are used.It consists of 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.Supply voltages of 24V allow for high efficiency.Surface Mount is mounted in the way.In total, it has 20 pins.This case results in a 500mA output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.When using this LED driving board, it is recommended that the supply voltage is set to 35V.As far as input voltage goes, its maximum is 35V volts.The input voltage minimum is 18V volts.It requires 20mA current to operate.
TDE1897RFP Features
Supplied from 24V
TDE1897RFP Applications
There are a lot of STMicroelectronics TDE1897RFP Power Switches ICs applications.
- Notebook and Tablet Computers
- Hot Swaps
- Low Voltage I/O System Power
- Telecom and Network Systems
- Gaming
- Portable Video Game Players
- Portable GPS
- Solid State Drivers
- Portable Devices
- Wireless Modem Data Cards
