TDE1897RFPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Current Rating | 500mA |
| Base Part Number | TDE189 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 35V |
| Power Supplies | 24V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1897RFPT Overview
Tape & Reel (TR) is how it's packaged.The 20-SOIC (0.295, 7.50mm Width) package contains it.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -25°C~85°C TA for reliable operation.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.I believe it belongs to the TDE189 family.It contains 20 terminations.The operation is performed through the 20 pins.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Using a voltage of 24V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 20 pins.It is set to 500mA in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The power supply of the part is 24V.In order to achieve the best efficiency, the supply voltage should be set to 35V.The maximum input voltage of the LED driver is 35V volts.It has a 18V volt minimum input voltage.For its operation, a current of 20mA is required.
TDE1897RFPT Features
Supplied from 24V
TDE1897RFPT Applications
There are a lot of STMicroelectronics TDE1897RFPT Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PDAs
- Smart Phones, Feature Phones
- Portable GPS Device
- Solid-State Drives
- Gaming
- Portable Music Players
- Wireless/Networking Cards
- Portable Devices
- Wireless Modem Data Cards
