TDE1898CFP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TDE189 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1898CFP Overview
As you can see, it's packaged in the way of a Tube.In the 20-SOIC (0.295, 7.50mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -25°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.It comes under the family of TDE189.It contains 20 terminations.In order to operate, 20 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.High efficiency is possible when the supply voltage is set to 24V.Surface Mount is mounted in the way of this lighting driver.The LED driver has a total of 20 pins.This case has the output current set to 500mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A supply voltage of 35V is recommended for maximum efficiency.Voltage input is limited to 35V volts.Input voltage must be at least 18V volts.A maximum current requirement of 20mA is required for its operation.
TDE1898CFP Features
Supplied from 24V
TDE1898CFP Applications
There are a lot of STMicroelectronics TDE1898CFP Power Switches ICs applications.
- Set-Top Boxes
- Wireless Modem Data Cards
- Hard Disk Drives
- USB3.1 Power Delivery
- Hot Swap
- Solid State Drivers
- Portable GPS
- Mobile Communication Devices
- PC Cards
- Low Voltage I/O System Power
