TDE1898CFPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | TDE189 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1898CFPT Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 20-SOIC (0.295, 7.50mm Width).It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -25°C~85°C TA.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts.It belongs to the family TDE189.It contains 20 terminations.20 pins are used for operation.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.A supply voltage of 24V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.In total, it has 20 pins.When this case is used, the output current is set to 500mA.The supply voltage should be set at 35V for best efficiency.This LED driving board can accept voltages up to 35V volts as an input.There is a minimum input voltage of 18V volts for this LED driver.It has a maximum current requirement of 20mA.
TDE1898CFPT Features
Supplied from 24V
TDE1898CFPT Applications
There are a lot of STMicroelectronics TDE1898CFPT Power Switches ICs applications.
- USB Protection
- Portable Devices
- Solid-State Drives
- PC Cards
- Hot Swap
- PDAs
- Portable GPS Device
- Gaming
- Wireless Headsets
- USB Ports/Hubs
