TDE1898RDP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 2.54mm |
| Current Rating | 500mA |
| Base Part Number | TDE189 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 18V |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 18V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Turn Off Time | 20 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 9V |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1898RDP Overview
It is package in Tube case.This package is included in 8-DIP (0.300, 7.62mm).The mounting type of the LED driver is Through Hole.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -25°C~85°C TA for reliable performance.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.It is part of the TDE189 family of LED drivers.There are 8 terminations in it.During operation, the 8 pins are used.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.The supply voltage can be 24V for high efficiency.The lighting driver is mounted in the direction of Through Hole.A total of 8 pins are included in this LED driver.The output current is set to 500mA in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to maximize efficiency, the supply voltage should be set at 35V.Voltage input is limited to 35V volts.The input voltage minimum is 18V volts.This system has a maximum current requirement of 20mA.
TDE1898RDP Features
Supplied from 24V
TDE1898RDP Applications
There are a lot of STMicroelectronics TDE1898RDP Power Switches ICs applications.
- PDAs
- Hot-Swap Systems
- Portable GPS Device
- USB Power Distribution
- Set-Top Boxes
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Solid-State Drives
- Storage Drives
- USB Ports/Hubs
