TEA3717DP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TEA3717 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 510/45V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 800mA |
| Output Configuration | Half Bridge (2) |
| Logic Function | AND |
| Output Current-Max | 1A |
| Supply Current-Max (Isup) | 25mA |
| Voltage - Load | 10V~40V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TEA3717DP Overview
This package is designed to work with [0].The part is packaged in a 16-DIP (0.300, 7.62mm) case.In most cases, it is recommended to mount the part at Through Hole.I believe it is suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 4.75V~5.25V volts.Operation temperature ranges from 0°C~150°C TJ.The part has 16terminations available.Drivers controllers is possible to apply voltage to the load at the rate of 10V~40V.I would like to remind you that this amplifier should be operated at 5V.The recommended way to mount it is Through Hole.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.Based on the TEA3717part number, it is found.There are 16 pins on it.In the Motion Control Electronicsseries, it is included.The supply voltage for this driver is 5.25V.
TEA3717DP Features
Applications : General Purpose
Load voltage across the chip 10V~40V
base on TEA3717 number
TEA3717DP Applications
There are a lot of STMicroelectronics TEA3717DP motor drivers applications.
- Architectural lighting
- PDAs
- Daytime running lights (DRLs)
- Telltale lights
- Commercial office
- Dash
- Camera-enabled smartphones
- Large outdoor LED display
- Camcorders
- Emergency lighting
