TEA3718SDP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES A 10 TO 45 V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TEA3718 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 510/45V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 25mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.5A |
| Logic Function | AND |
| Voltage - Load | 10V~45V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TEA3718SDP Overview
Drivers controllers includes a Tubepackage.This part is packaged with a case of [0].Drivers controllers is recommended that the part be mounted by Through Hole.I believe it would be suitable for the component connected to General Purpose.4.75V~5.25V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of 0°C~150°C TJdegrees Celsius.A total of 16terminations are available in the part.At a rate of [0], voltage can be applied to the load.The amplifier should be set to 5V.The recommended way to mount it is Through Hole.The output current should be kept at 1.5A for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.The part number TEA3718indicates that it is found.16pins are used in its design.The Motion Control Electronicsseries includes this item.Also, ALSO REQUIRES A 10 TO 45 V SUPPLYcan be found as a characteristic of this type.
TEA3718SDP Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on TEA3718 number
Additional Feature: ALSO REQUIRES A 10 TO 45 V SUPPLY
TEA3718SDP Applications
There are a lot of STMicroelectronics TEA3718SDP motor drivers applications.
- Daytime running lights (DRLs)
- CHMSL (center high-mount stop lamps)
- Footwell lighting
- Automotive instrumentation
- LED bias
- LCD displays
- Street lights
- Tail lights
- High brightness LED lighting
- Side marker lights
