Parameters |
Factory Lead Time |
1 Week |
Mount |
PCB, Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SMD/SMT |
Number of Pins |
2 |
Operating Temperature |
-40°C~100°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Max Operating Temperature |
100°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
215mW |
Diode Type |
PIN |
Power Dissipation |
215mW |
Viewing Angle |
130° |
Voltage - DC Reverse (Vr) (Max) |
16V |
Max Reverse Voltage (DC) |
16V |
Reverse Breakdown Voltage |
16V |
Wavelength |
540nm |
Reverse Voltage (DC) |
16V |
Dark Current |
2nA |
Spectral Range |
430nm ~ 610nm |
Active Area |
7.5mm2 |
Current - Dark (Typ) |
2nA |
Height |
1.08mm |
Length |
5mm |
Width |
4.25mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TEMD5510FX01 Overview
Tape & Reel (TR) is used to protect the photodiodes from damage. A safety package containing the photodiodes is provided for their protection. As long as the photodiodes are operated continuously in reverse-bias mode, the maximum voltage they can tolerate is 16V. In reverse-bias mode, the voltage for the photodiodes should not exceed 16V continuously. Photodiodes have pins 2. During the operation of a circuit, photodiodes can release 215mW heat. During operation, photodiodes should not have a temperature higher than 100°C. It should be noted that the photodiodes should be operated at -40°C as a minimum operating temperature. Anode voltage for the reverse anode of the photodiodes should be 16V. Photodiodes generally release 215mW heat when connected in a circuit. In the DC circuit, the photodiodes can function correctly with a reverse voltage of 16V. Without light input, a photodiode will produce 2nA current.
TEMD5510FX01 Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 430nm ~ 610nm
Viewing Angle: 130°
TEMD5510FX01 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD5510FX01 Photodiodes applications.
- Solar Cells
- Measurement Levelling
- Pulse Oximetry
- Diode Laser Monitoring
- Emitter Alignment
- Optical Switches
- Low Capacitance
- Shaft encoders
- High speed photo detectors
- Low Cost Light Monitoring