Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
0805 (2012 Metric) |
Number of Pins |
2 |
Shape |
SQUARE |
Semiconductor Material |
Silicon |
Operating Temperature |
-40°C~100°C |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Additional Feature |
HIGH SENSITIVITY |
HTS Code |
8541.40.60.50 |
Subcategory |
Photo Diodes |
Max Power Dissipation |
215mW |
Number of Functions |
1 |
Case Code (Metric) |
2012 |
Case Code (Imperial) |
0805 |
Configuration |
SINGLE |
Diode Type |
PIN |
Power Dissipation |
215mW |
Viewing Angle |
120° |
Forward Current |
50mA |
Rise Time |
100ns |
Forward Voltage |
1V |
Fall Time (Typ) |
100 ns |
Max Reverse Voltage (DC) |
60V |
Power Consumption |
215mW |
Reverse Breakdown Voltage |
60V |
Wavelength |
900nm |
Reverse Voltage (DC) |
60V |
Dark Current |
1nA |
Spectral Range |
430nm ~ 1100nm |
Active Area |
0.23mm2 |
Infrared Range |
YES |
Light Current-Nom |
0.003mA |
Height |
850μm |
Length |
2mm |
Width |
1.25mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TEMD7000X01 Overview
In order to protect these photodiodes from damage, they are packaged in the Tape & Reel (TR). For safety reasons, the photodiodes are packaged in 0805 (2012 Metric) packages. It is recommended to set the reverse-bias mode for the photodiodes to not exceed 60V on a continuous basis. A photodiode is equipped with 2 pins. During a circuit, the photodiodes could release 215mW heat. A reverse anode voltage of 60V should be applied to the photodiodes. In general, the maximum heat generated by photodiodes should be 215mW in a circuit. If the reverse voltage is 60V, the photodiodes can operate properly in the DC circuit. The voltage needed to get current to flow across a photodiode should be 1V. Without light input, a photodiode will produce 1nA current.
TEMD7000X01 Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 430nm ~ 1100nm
Viewing Angle: 120°
TEMD7000X01 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD7000X01 Photodiodes applications.
- Position sensing
- Machine Controls
- Infrared remote control
- Vision Controls
- Industrial Automation
- Health Monitoring
- LiDAR
- Low Cost Light Monitoring
- Optical Analytics
- Currency Validation