THS3001CDGNR
| Parameters | |
|---|---|
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~33V ±4.5V~16.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 420MHz |
| Gain Bandwidth Product | 1.75GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 420000 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 40 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.71W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3001 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 6.6mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 6500V/μs |
THS3001CDGNR Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 6.6mA and 10 . There are 1 elements in total in this linear amplifier. A TR-shaped amplifier is used to pack the buffer amps.
THS3001CDGNR Features
8 Pins
supply voltage of 5V
THS3001CDGNR Applications
There are a lot of Texas Instruments THS3001CDGNR Instrumentational OP Amps applications.
- MP3
- Professional videography
- Measurements of Wheatstone bridge
- Signal amplification
- Video amplifiers
- Navigation
- Vehicle electronics
- Semiconductor detectors
- Signal transformation
- ECG equipment
