Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
24.408939mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
1.71W |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
THS3001 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
6.9mA |
Nominal Supply Current |
9.5mA |
Power Dissipation |
1.71W |
Slew Rate |
6500V/μs |
Amplifier Type |
Current Feedback |
Common Mode Rejection Ratio |
62 dB |
Current - Input Bias |
2μA |
Voltage - Supply, Single/Dual (±) |
9V~37V ±4.5V~18.5V |
Output Current per Channel |
120mA |
Input Offset Voltage (Vos) |
3mV |
Bandwidth |
330MHz |
Gain Bandwidth Product |
1.75GHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
420000 kHz |
Power Supply Rejection Ratio (PSRR) |
65dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1mV |
Settling Time |
40 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
420MHz |
Programmable Power |
NO |
Max I/O Voltage |
3mV |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
THS3001HVIDGN Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Current Feedback-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 8 pins on this chip. Op amp rates 3mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using an 6.9mA supply current, this operational amplifier ics can be operated. Buffer op amp is equipped with 1 channels on the device.
THS3001HVIDGN Features
8 Pins
supply voltage of 5V
THS3001HVIDGN Applications
There are a lot of Texas Instruments THS3001HVIDGN Instrumentational OP Amps applications.
- Test and measurement instruments
- Ultrasound transducers
- Differentiator circuits
- single/dual op amp sum and difference circuits
- Strain gauges
- MP3
- Tablets
- Automation control systems
- Home audio systems
- Exponential operation circuits