THS3001HVIDGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3001 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 6.9mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 6500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~37V ±4.5V~18.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 420MHz |
| Gain Bandwidth Product | 1.75GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 420000 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 40 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3001HVIDGNG4 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. Current Feedback-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 3mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 6.9mA . There are 1 elements in this buffer amplifier.
THS3001HVIDGNG4 Features
8 Pins
supply voltage of 5V
THS3001HVIDGNG4 Applications
There are a lot of Texas Instruments THS3001HVIDGNG4 Instrumentational OP Amps applications.
- High input resistance broadband
- Active probe
- Ultrasound transducers
- Displayers for aircraft and air transportation control systems
- earphone
- Professional videography
- Exponential operation circuits
- RF cable systems
- Test and measurement instruments
- High/low-pass filter circuit
