THS3001IDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.71W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3001 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 6.6mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 6500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~33V ±4.5V~16.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 420MHz |
| Gain Bandwidth Product | 1.75GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 420000 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 40 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3001IDGNR Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 3mV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 6.6mA . The op amp ic has 1 channels on it. For packing the buffer amplifier, the TR-axis is adopted.
THS3001IDGNR Features
8 Pins
supply voltage of 5V
THS3001IDGNR Applications
There are a lot of Texas Instruments THS3001IDGNR Instrumentational OP Amps applications.
- Car stereo
- Subtraction operation circuits
- Portable media players
- Band-pass filter
- Television broadcasting equipment
- High input resistance broadband
- Video computer boards
- Industrial control system
- Video conversion and routing
- Commercial audio systems
