THS3091DDAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.18W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS3091 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 2.18W |
| Slew Rate | 7300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 280mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 235MHz |
| Gain Bandwidth Product | 235MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 235000 kHz |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 42 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 180MHz |
| Programmable Power | NO |
| Max I/O Voltage | 4mV |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3091DDAR Overview
In the package, you will find a 8-PowerSOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Current Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 900μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 9.5mA can be used to operate this linear amplifier. The op amp is rated for an operating supply voltage of 1. An buffer amplifier is packed in a TR-shape according to the design.
THS3091DDAR Features
8 Pins
supply voltage of 15V
THS3091DDAR Applications
There are a lot of Texas Instruments THS3091DDAR Instrumentational OP Amps applications.
- Weighing systems
- Communication device
- Multiplication circuits
- Integrator circuits
- Exponential operation circuits
- High speed sample
- Polarized electrodes
- Weak signal detection
- Television broadcasting equipment
- Portable docking station
