THS3092D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.02W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3092 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 1.02W |
| Slew Rate | 5700V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 280mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 145MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 145000 kHz |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 72 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 145MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 4mV |
| Input Offset Current-Max (IIO) | 15μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3092D Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Current Feedback-types. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 900μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 9.5mA volt supply current is needed for this linear amplifier to operate. Op amp ic has 2 channels.
THS3092D Features
8 Pins
supply voltage of 15V
THS3092D Applications
There are a lot of Texas Instruments THS3092D Instrumentational OP Amps applications.
- Vehicle electronics
- Portable media players
- Video conversion and routing
- Digital cameras
- Addition operation circuits
- High speed sample
- Tablets
- Precision measurement
- Integrator circuits
- Signal amplification
