THS3095DDA
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 235000 kHz |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 42 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 180MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max I/O Voltage | 4mV |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2.18W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS3095 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 2.18W |
| Slew Rate | 7300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 280mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 235MHz |
| Gain Bandwidth Product | 235MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
THS3095DDA Overview
In order to protect the op amps, a 8-PowerSOIC (0.154, 3.90mm Width) case is used. This is a Current Feedback type op amp. The op amp is delivered to you in a Tube case. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 900μV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. This op amp can operate from a supply current at 9.5mA. As far as the device is concerned, buffer amplifier has 1 channels.
THS3095DDA Features
8 Pins
supply voltage of 15V
THS3095DDA Applications
There are a lot of Texas Instruments THS3095DDA Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- E-book readers
- Commercial audio systems
- Voltage regulation circuit
- Video computer boards
- Measurements of Wheatstone bridge
- Division circuits
- Information processing
- Non-polarized electrodes
- Inverse/same-phase proportional circuit
