banner_page

THS3096D

280mA per Channel 4μA 60 dB Instrumentational OP Amps 10V~30V ±5V~15V THS3096 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS3096D
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 703
  • Description: 280mA per Channel 4μA 60 dB Instrumentational OP Amps 10V~30V ±5V~15V THS3096 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 14
Weight 133.412856mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 1.02W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Base Part Number THS3096
Pin Count 14
Number of Elements 2
Operating Supply Current 9.5mA
Nominal Supply Current 21mA
Power Dissipation 1.02W
Slew Rate 5700V/μs
Amplifier Type Current Feedback
Common Mode Rejection Ratio 60 dB
Current - Input Bias 4μA
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~15V
Output Current per Channel 280mA
Input Offset Voltage (Vos) 900μV
Bandwidth 160MHz
Gain Bandwidth Product 145MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 145000 kHz
Power Supply Rejection Ratio (PSRR) 68dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16.5V
Settling Time 42 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 145MHz
Programmable Power NO
Neg Supply Voltage-Max (Vsup) -16.5V
Max I/O Voltage 4mV
Input Offset Current-Max (IIO) 15μA
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS3096D Overview


There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A Current Feedback-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 14 pins that make up the linear amplifier. There is an input offset voltage of 900μV for this buffer op amp. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 9.5mA supply current, this operational amplifier ics can be operated. There are 2 elements in this buffer amplifier.

THS3096D Features


14 Pins
supply voltage of 15V

THS3096D Applications


There are a lot of Texas Instruments THS3096D Instrumentational OP Amps applications.

  • Precision measurement
  • Blood pressure sensors
  • Computer workstations
  • Image computer boards
  • Logarithmic operation circuits
  • Communication device
  • Voltage regulation circuit
  • Ultrasound transducers
  • Medical imaging
  • Active probe

Write a review

Note: HTML is not translated!
    Bad           Good