THS3110IDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3110 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 1300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 260mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Settling Time | 250 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 66MHz |
| Bias Current-Max (IIB) @25C | 9.5μA |
| Programmable Power | NO |
| Max I/O Voltage | 8mV |
| Wideband | YES |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3110IDGNR Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Op amps are Current Feedback types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 4.8mA , this buffer op amp will be able to operate. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. An buffer amplifier is packed in a TR-shape according to the design.
THS3110IDGNR Features
8 Pins
supply voltage of 5V
THS3110IDGNR Applications
There are a lot of Texas Instruments THS3110IDGNR Instrumentational OP Amps applications.
- Television
- Laptop
- Home audio systems
- Test and measurement instruments
- Signal filtering
- pH (acidity)
- Portable media players
- Computer workstations
- Thermocouples
- Signal transformation
