THS3111IDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3111 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 1300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 260mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 250 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 66MHz |
| Bias Current-Max (IIB) @25C | 9.5μA |
| Programmable Power | NO |
| Max I/O Voltage | 8mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3111IDGN Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. There is an input offset voltage of 3mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 4.8mA. This linear amplifier has a total of 1 elements.
THS3111IDGN Features
8 Pins
supply voltage of 5V
THS3111IDGN Applications
There are a lot of Texas Instruments THS3111IDGN Instrumentational OP Amps applications.
- pH (acidity)
- MP3
- Signal amplification
- Thermocouples
- Tablets
- ECG equipment
- Integrator circuits
- PDA
- Logarithmic operation circuits
- Hand-held batteries
