THS3115CPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3115 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 4.9mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 3.3W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 330nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 270mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 110MHz |
| Gain Bandwidth Product | 103MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 103MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 10mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3115CPWP Overview
A 14-PowerTSSOP (0.173, 4.40mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 14 terminations. The total number of pins on linear amplifier is 14. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 14 pins. In terms of input offset voltage, operational amplifier rates 3mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using a supply current of 4.9mA , this buffer op amp will be able to operate. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply.
THS3115CPWP Features
14 Pins
supply voltage of 15V
THS3115CPWP Applications
There are a lot of Texas Instruments THS3115CPWP Instrumentational OP Amps applications.
- Large motor controllers
- Displayers for aircraft and air transportation control systems
- Television
- Band-pass filter
- Polarized electrodes
- Video amplifiers
- Proportional operation circuits
- Television broadcasting equipment
- Measurements of Wheatstone bridge
- Cinema or auditorium audio system
