THS3115IPWP
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 110MHz |
| Gain Bandwidth Product | 103MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 103MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 8mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3115 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 4.9mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 3.3W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 330nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 270mA |
THS3115IPWP Overview
The linear amplifier is packaged in a 14-PowerTSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 14h termination of the year. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 4.9mA can be used to operate this linear amplifier. Op amp has total of 2 elements.
THS3115IPWP Features
14 Pins
supply voltage of 15V
THS3115IPWP Applications
There are a lot of Texas Instruments THS3115IPWP Instrumentational OP Amps applications.
- Fission chambers
- High-frequency data acquisition systems
- Radar
- RF cable systems
- Voltage regulation circuit
- Thermocouples
- Weighing systems
- Comparator
- Gaming industry
- Strain gauges
