THS3115IPWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3115 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 4.9mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 3.3W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 330nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 270mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 110MHz |
| Gain Bandwidth Product | 103MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 103MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 8mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3115IPWPR Overview
It is packaged in an 14-PowerTSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the Current Feedback type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 14. The pins on this board total to 14 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 14-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 4.9mA. For the operating supply voltage of the op amp ic, there is a rating of 2. For the packing of the instrumentation amplifier, TR is adopted.
THS3115IPWPR Features
14 Pins
supply voltage of 15V
THS3115IPWPR Applications
There are a lot of Texas Instruments THS3115IPWPR Instrumentational OP Amps applications.
- Thermocouples
- Proportional operation circuits
- Weak signal detection
- MP3
- Exponential operation circuits
- Logarithmic operation circuits
- Subtraction operation circuits
- Broadcasting
- Differentiator circuits
- Active probe
