THS3115IPWPRG4
| Parameters | |
|---|---|
| Gain Bandwidth Product | 103MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 103MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 10mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3115 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 4.9mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 3.3W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 330nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 270mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 110MHz |
THS3115IPWPRG4 Overview
A 14-PowerTSSOP (0.173, 4.40mm Width) case is used to package the op amp. This is a Current Feedback type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAn 4.9mA volt supply current is needed for this linear amplifier to operate. The linear amplifier consists of 2 different elements in total. An buffer amplifier is packed in a TR-shape according to the design.
THS3115IPWPRG4 Features
14 Pins
supply voltage of 15V
THS3115IPWPRG4 Applications
There are a lot of Texas Instruments THS3115IPWPRG4 Instrumentational OP Amps applications.
- Video computer boards
- Subtraction operation circuits
- Polarized electrodes
- Displayers for aircraft and air transportation control systems
- Power control
- Exponential operation circuits
- Ultrasound transducers
- High/low-pass filter circuit
- Strain gauges
- Automation control systems
