THS3120IDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3120 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 1700V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 490mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 130000 kHz |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 11 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 66MHz |
| Bias Current-Max (IIB) @25C | 9.5μA |
| Programmable Power | NO |
| Max I/O Voltage | 8mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3120IDGN Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case in which the instrumentation amplifier is packaged. An op amp ic of the Current Feedback type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 2mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 7mA , this buffer op amp will be able to operate. There are a total of 1 elements in this linear amplifier.
THS3120IDGN Features
8 Pins
supply voltage of 5V
THS3120IDGN Applications
There are a lot of Texas Instruments THS3120IDGN Instrumentational OP Amps applications.
- Video data acquisition
- Communication
- Subtraction operation circuits
- Signal operation
- Power control
- Switching amplifier
- Biopotential
- Fission chambers
- Wireless base stations
- Professional videography
